Home › LED resistors › red LED, 6V
Resistor for a red LED on 6 volts
Advertisement
200 Ω
resistor for a red LED on 6 V at 20 mA (calculated 200 Ω)
Red LED on 6 V by current
| LED current | Exact resistor | Standard value |
|---|---|---|
| 5 mA | 800 Ω | 820 Ω |
| 10 mA | 400 Ω | 430 Ω |
| 15 mA | 267 Ω | 270 Ω |
| 20 mA | 200 Ω | 200 Ω |
Assumes 2.0 V forward voltage; check your LED datasheet. One LED per resistor; for several LEDs in series subtract each forward voltage from the supply.
Other LED colors on 6 V
FAQ
What resistor for a red LED on 6V?
For a red LED (about 2.0 V forward voltage) at 20 mA on 6 V: R = (6 − 2.0) ÷ 0.020 = 200 Ω. The next standard value is 200 Ω, which gives 20.0 mA.
What resistor is safe for an Arduino or breadboard with a red LED on 6V?
A 430 Ω resistor limits the current to about 9 mA - dimmer but safe and long-lived. Use 200 Ω for full brightness.
What power rating does the resistor need?
At 20.0 mA it dissipates about 80 mW, so a 1/4 W resistor is enough.
LED resistor calculator · all supply voltages · Ohm’s law
Advertisement
Free calculator by WireMath