Home › LED resistors › red LED, 24V
Resistor for a red LED on 24 volts
Advertisement
1,100 Ω
resistor for a red LED on 24 V at 20 mA (calculated 1,100 Ω)
Red LED on 24 V by current
| LED current | Exact resistor | Standard value |
|---|---|---|
| 5 mA | 4,400 Ω | 4,700 Ω |
| 10 mA | 2,200 Ω | 2,200 Ω |
| 15 mA | 1,467 Ω | 1,500 Ω |
| 20 mA | 1,100 Ω | 1,100 Ω |
Assumes 2.0 V forward voltage; check your LED datasheet. One LED per resistor; for several LEDs in series subtract each forward voltage from the supply.
Other LED colors on 24 V
FAQ
What resistor for a red LED on 24V?
For a red LED (about 2.0 V forward voltage) at 20 mA on 24 V: R = (24 − 2.0) ÷ 0.020 = 1,100 Ω. The next standard value is 1,100 Ω, which gives 20.0 mA.
What resistor is safe for an Arduino or breadboard with a red LED on 24V?
A 2,200 Ω resistor limits the current to about 10 mA - dimmer but safe and long-lived. Use 1,100 Ω for full brightness.
What power rating does the resistor need?
At 20.0 mA it dissipates about 440 mW, so a 1 W resistor is enough.
LED resistor calculator · all supply voltages · Ohm’s law
Advertisement
Free calculator by WireMath